Mean Mother 9500LB Boss Series Winch - Wire

Product Code: EB9500

Availability:In stock

$1,349.00 1,349.00


Ask about this product

The "Boss" series winch is the perfect choice for 4WD enthusiasts who want the very best. They are designed not only to look tough but provide fault free operation under the toughest of Australian conditions.Each winch in the BOSS series features a three stage planetary gearbox with BS 1/2 H2600 sintered bronze bushings and S45C hardened carbon steel gears, providing superior strength even when working under the toughest of conditions. These bushings have been pressed and stamped (no pop rivets) into the gear carrier. A sliding ring gear clutch provides maximum strength and efficiency in forward and reverse winching operations with ease of free spool functionality. Each gear box is assembled and lubricated using synthetic grease and conforms to our strict assembly guidelines. Providing strength and enduring the pulling forces exerted is a hardened seamless steel drum assembly. The in-drum brake system features automatic direct drive load holding and Kevlar brake pads for improved safety. The features listed will assure you of quality and reliability when putting your 4x4 to the test.

Fitted with 5.56mm x 12m galvanised aircraft cable which has high abrasive capabilities that will give you confidence from daily wear and tear.


  • BS 1/2 H2600 sintered bronze bushings
  • HRC 45±2 Carburizing S45C hardened carbon steel gears
  • Stamped planetary gear carriers
  • Cu-Ag contactors (Silvered-alloyed copper)
  • Kevlar brake pads


Specifications : 9500lb (4309kg) - Boss Series
Voltage : 12 Volt
Gear Ratio : 166:1
Gear Tran  :   3 Stage Planetary
Clutch : Sliding Ring Gear
Motor Type  :   Series Wound
Motor  :  4.6 Hp, 3.43 Kw
Control   :  Hand Control, 5m lead
Braking   :  Automatic Direct Drive Load Holding
Drum   :  Hardened Seamless Steel 63mm x 228mm(2.45" x 9")
Cable  :  30 Metres x 8mm
Clevis Hook :   3/8"
Overall Dimensions     554mm x 170mm x 190mm (27.82" x 6.7" x 7.5")
Net Weight   :  38kg
Mounting Bolt Pattern  :   254mm x 114.3mm (10" x 4.5")
Battery Power Cables  :   2 x 1900mm x 25mm², Tinned Copper with Sheath Protection
Motor Power Cables   :  3 x 450mm x 25mm², Tinned Copper with Sheath Protection
Recommended Battery   :  Minimum 650CCA

Comes With:

  •  Winch with laser engraved Serial Number
  • Control Box
  • Hand Control with storage bag
  • Tinned Copper Power Cable kit with Fibreglass Sheath Protection
  • 8mm x 30m, (7x19 construction galvanised aircraft cable)
  • Roller Fairlead
  • 3/8" Clevis Hook
  • Hand Saver Hook Strap
  • Detailed Instruction Manual
  • Warranty registration Card
  • Winch and Fairlead Mounting Hardware (Bolts, Washer and Nuts)
  • Side mounting Kit for control box
  • Extra long control box mounting bolts
  • Spare Gearbox gasket


All prices on the website are 'Supplied Only' unless specified.
We provide professional fitting services - Call us on 02 9569 4217 to consult and get a Free Quote.